Dry_After_Flood

How to Drain and Dry a Water-Damaged Home

If you’re like many of your customers, you’re probably still cleaning up after last week’s storms. In the past week, we’ve scheduled over thirty appointments for our basement waterproofing system, B-Dry and over forty appointments for Gutter Helmet. Unfortunately, some customers moved too slowly and sustained water damage to their homes. They’re now tasked with the arduous process of draining and drying their interior. If you’re in the same boat (but hopefully not literally), we’re here to help. Here’s some tips for reducing moisture in your home:

Draining Moisture from Your Home

  • Sump Pump: A sump pump will continuously remove water from your basement via hose or pipe. A sump pump is especially useful for removing standing water. You can rent a sump pump for about $44/day, or purchase one for $100 or more.
  • Wet/Dry Vacuum: A wet/dry vacuum is used just like a traditional vacuum, except it has the ability to suck up moisture and wetness. This is a great tool for removing water from carpets and rugs.
  • Absorb moisture: Absorb moisture with a desiccant. A desiccant is a drying solvent that naturally absorbs and retains moisture. These products are often made from silica, calcium oxide, or clay. Some desiccants change colors to indicate moisture-saturation levels.

Drying Up Humidity in Your Home

  • Dehumidifier: A dehumidifier removes water vapor from the air, leaving your home cool and dry. Make sure to shut windows and doors when using a dehumidifier to avoid bringing more moisture inside.
  • Open Doors & Windows: Don’t underestimate the power of air circulation. Sometimes all it takes to dry something out is time and a good breeze. Skip this step if it is particularly humid outside your home.
  • Hot and Cold Method: This neat trick comes from Jeffery Gross, a home restoration professional:

    “Warm air will hold more moisture than cooler air,” Mr. Gross said. So a homeowner can close all doors and windows and run the air-conditioning. Once the house has cooled and the air is dry, the air-conditioning should be turned off and the heat turned on. When the temperature has reached, say, 80 degrees or so, the heat should be turned off and the air-conditioning turned back on until all the warm air has been removed. The cycle should be repeated until the house is dry.”


Before you begin restoring your home, make sure your home is safe to occupy- especially if your home has been in a flood. Make sure that the water that has entered your home has not been contaminated with sewage or debris. Check that your electrical systems haven’t come in contact with any standing water. After you’ve ensured your safety, call your homeowners insurance company. Depending on your policy, you may be covered for flooding due to storms, backed-up city sewers and storm drains or burst pipes.

Make sure your home never becomes soggy again by waterproofing your basement and ensuring your home has proper drainage. Our basement waterproofing system B-Dry works by protecting the five most common locations water enters your home. With Gutter Helmet, your gutters will never clog and spill rainwater into your yard. Call us at (309) 717-0105 or fill out this form to schedule your free in-home estimate today.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *